Thailand's Third 10 T/H Sawdust Pellet Production Line Project
Complete Sawdust Pellet Production Line Solution
This 10 T/H sawdust pellet production line is the third pellet production line ordered by our customer in Thailand. It is designed to produce high-quality biomass fuel pellets from wood sawdust through a complete and continuous production process. The production line integrates a rotary screen, chain grate furnace, rotary dryer, hydraulic storage silo, pellet machine monitoring system, four XGJ850 pellet machines (including one standby machine), cooler, finished product silo, and conveying equipment into one complete biomass pellet production solution. Designed for stable and continuous operation, the production line provides an efficient solution for sawdust pellet production, from raw material preparation to finished pellet storage.
Sawdust Pellet Production Process
Screening Section
The raw material is first conveyed to the rotary screen, where oversized materials are separated from qualified fine material. Only the qualified material enters the next production stage, ensuring stable drying performance and consistent pellet quality.
Drying Section
After screening, the qualified material is conveyed into the rotary dryer for drying. The dryer is heated by a chain grate furnace, which provides a stable heat source for the drying process. After drying, the material passes through a four-stage cyclone system, where it is discharged before being lifted by a bucket elevator into the hydraulic storage silo for temporary storage.
Pelletizing Section
The material stored in the hydraulic storage silo is conveyed by a belt conveyor to the dual-shaft uniform silo above the pellet machines, where it is evenly distributed to ensure a stable material supply during pellet production. The production line is equipped with four XGJ850 pellet machines, including one standby machine. Each pellet machine has a production capacity of approximately 3–4 T/H, providing reliable operation and production flexibility. A pellet machine monitoring system allows operators to monitor the operating status of the pellet machines in real time.
Cooling Section
Freshly produced biomass pellets are conveyed to the cooler by a conveyor and then lifted by a bucket elevator. The cooling process reduces the temperature of the pellets, improving pellet stability and preparing them for storage.
Finished Product Storage Section
After cooling, the finished biomass pellets are conveyed into the finished product silo for storage. This final stage completes the pellet production process, finished product silo providing a proper storage location for the finished pellets after cooling.
Key Features of This Sawdust Pellet Production Line
Production Capacity: 10 T/H
- Raw Material: sawdust
- Complete Process: Screening → Drying → Pelletizing → Cooling → Packing
- Heat Source: Chain grate furnace
- Pelletizing System: Equipped with pellet machine monitoring system
- Final Product: Biomass fuel pellets
On-Site Installation & Commissioning Support
Our engineers provide on-site support during the installation and commissioning of the pellet production line. They assist with equipment setup, system adjustment, trial operation, and guide local operators on proper operation and maintenance methods. Through professional technical support and on-site training, the production line can be smoothly put into operation
Contact Us
Looking for a customized biomass pellet production solution? We provide complete pellet production solutions for various biomass materials, including wood waste, agricultural residues, and other biomass resources. Our production lines can be customized according to different raw materials, production capacities, and project requirements. Contact our team today to discuss your biomass pellet project.
